MY ACCOUNT SHOPPING CART CHECKOUT
 
No Vehicle Selected (choose your car)
2007 ARIEL ATOM Track Model - w/ Alcon Brakes > Street Brake Pads > Hawk Street-Race
Hawk Street-Race
 
 
Front -
Status: Available
$147.64
Rear -
Status: Available
$147.64

"THE MASTER OF FASTER" The racers never ending goal for greatness, the art of perfection is now complemented by the latest in technology. Racing technology continues to find its way to the street, and at Hawk Performance we have found a way to make you get closer to that goal!

This was the motivation behind the development of the new Hawk High Performance Street/Race compound. We built for you to go racing on it. Dive into the next tight corner, brake later and edge past your competition, but don't put it on a trailer after you lapped the field, take your helmet off and drive to you celebratory dinner. The new Street/Race compound from Hawk Performance truly gives you that ability.

The trend of using a street car in competition increases every year and competitors are always demanding more, they are always looking for an edge over the competition. The new Hawk High Performance Street/Race brake pad compound provides that edge and provides it in spades; it is the ultimate high performance, street brake pad! Perfect for aggressive street car owners that also use their cars for autocross, HPDE, open track and time trail racing. High Performance Street/Race pads feature Hawk's mechanical (bond) retention system (MRS), slotted friction, hot bond shim, and pad chamfer that improve the vehicle handling, safety and driver confidence. It performs flawlessly at all temperatures and operating temperatures range from 100-1200F with superior torque while providing a consistent feel and characteristics.

Using decades of engineering and technology from our racing programs, the Hawk Performance team cross engineered the new Street/Race compound. The pad provides a smooth, consistent brake pedal feel while still proving superior brake rotor grab, the performance of this pad cannot be matched without installing racing pads. The High Performance Street/Race pad is designed to perform consistently in temperatures up to 1200F while still maintaining great pedal feel.

Features:
While the High Performance Street/Race pad is ideal for many aggressive drivers that own high performance street cars, it does produce more noise and dust.
- Aggressive Torque
- Great Rotor and Pad Wear Life
- 100-1200F Operating Temperatures
- Smooth and Predictable Control
- Designed to Deliver High Deceleration Rates
- Smooth Braking Feel
- Consistent Brake Release Characteristics

Hawk Brake Pad Installation Procedure

  • Install Brake pads properly. Be sure pads are securely positioned in the caliper.
  • Flush system with fresh brake fluid.
  • Check all hydraulic parts for excess wear and tear.
  • Check disc for proper thickness, parallelism, and lateral run-out.
  • Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
  • If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.
  • Inspect calipers for freedom of movement. Lubricate where necessary.

Hawk Brake Bedding-in Procedure
  • Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
  • Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
  • DO NOT DRAG THE BRAKES!  (after stopping - do not leave your foot on the brake pedal)
  • Allow 15 mintues or more for the brake system to cool down.
  • Your new Hawk pads are ready for use.

Some other items you may
want to consider:
1 Liter
 
$16.95
Case Quantity - (10 Bottles)
 
$159.00

Copyright 2017 BestBrakes (Terms and Conditions)
Select Your Vehicle